TeamSpeak: Music Manual
13 posts
• Page 1 of 1
TeamSpeak: Music Manual
by RapidHail » Fri Dec 19, 2008 20:05
1. Open control panel
2. Then click advanced
3. Then Options / Preferences
4. Choosing Record
a) Sometimes you can to that directly, and then just check Record
b) In other way you need to change device into INPUT device first
4b)Choose INPUT device (have 'input' in name)
5. Click OK
6. Choose STEREO MIX(er)
And now play music you want via Winamp, WMP etc.
After all just check CD-Player in step 6, or Mic if you want speak.
2. Then click advanced
3. Then Options / Preferences
4. Choosing Record
a) Sometimes you can to that directly, and then just check Record
b) In other way you need to change device into INPUT device first
4b)Choose INPUT device (have 'input' in name)
5. Click OK
6. Choose STEREO MIX(er)
And now play music you want via Winamp, WMP etc.
After all just check CD-Player in step 6, or Mic if you want speak.
-=RapidHail=-: Do or do not... There is no try.
-|PS|- Server Monitor
eRepublik Citizen
Network Toolkit
-|PS|- Server Monitor
eRepublik Citizen
Network Toolkit
by Dante » Sat Dec 20, 2008 11:12
It's a bit hard to follow but I think I got there in the end, here's how:
Click start, then all programs, then toward the top-left there is accesseries.
Hover over it, then hover over entertainment, now click volume control.
Go to Options, then click properties. Go to your primary sound card, I had 3 listed, 2 bluetooth entries and "Sigmatel Audio"(the right one for me) I chose this from the drop-down menu at the top. Then I click the circle by recording. It should then show 4 entries, or atleast mine did; make sure stereo mix is ticked. Now click "OK." Your Volume control should now be called "recording control" on the taskbar, also it will have gotten smaller, probably. There is a section on the control called "Stereo Mix," at the bottom of this section there is a tick box, with "Select" next to it, make Sure this is Ticked now exit. Open Teamspeak and join the PS:Music Corner and play your music normally through your music player of choice, you should choose Winamp, it rocks.
If you are doing it correctly by your name, in the teamspeak window, the icon should be lit.
Good luck.
/Dante
Click start, then all programs, then toward the top-left there is accesseries.
Hover over it, then hover over entertainment, now click volume control.
Go to Options, then click properties. Go to your primary sound card, I had 3 listed, 2 bluetooth entries and "Sigmatel Audio"(the right one for me) I chose this from the drop-down menu at the top. Then I click the circle by recording. It should then show 4 entries, or atleast mine did; make sure stereo mix is ticked. Now click "OK." Your Volume control should now be called "recording control" on the taskbar, also it will have gotten smaller, probably. There is a section on the control called "Stereo Mix," at the bottom of this section there is a tick box, with "Select" next to it, make Sure this is Ticked now exit. Open Teamspeak and join the PS:Music Corner and play your music normally through your music player of choice, you should choose Winamp, it rocks.
If you are doing it correctly by your name, in the teamspeak window, the icon should be lit.
Good luck.
/Dante
- warren-the-ape
-
- Posts: 6378
- Joined: Tue May 09, 2006 0:00
- Location: Netherlands
by warren-the-ape » Sat Dec 20, 2008 19:25
Aah, so thats what Polish looks like 
Nice tut Rapid.
Just want to add that some of the recent (on-board) soundchips/cards don't offer this functionality.
Something to do with big record companies, DRM rights and a whole lot of money..
My brother f.e. owns a Sony (that would be one of those big record companies) laptop that just misses this option completely.
But you could always fiddle around with a nice little cable running from your line-out into your mike/line-in. Sure you'll get some quality loss but who will notice at Teamspeak
Nice tut Rapid.
Just want to add that some of the recent (on-board) soundchips/cards don't offer this functionality.
Something to do with big record companies, DRM rights and a whole lot of money..
My brother f.e. owns a Sony (that would be one of those big record companies) laptop that just misses this option completely.
But you could always fiddle around with a nice little cable running from your line-out into your mike/line-in. Sure you'll get some quality loss but who will notice at Teamspeak
"When the pin is pulled, Mr. Grenade is not our friend." 
by Ninjadeer » Sat Dec 20, 2008 20:13
dunno why it works like this... but at step 6 i choosed microphone and took my mic off... it still plays music, and even with better quality than with using stereo mix... strange, but it works 
thx for diamond 
by Ajit » Sat Dec 20, 2008 21:25
yeah and i did like ninja did, and its better but not the best like ninja says, my quality suck. How i can change my quality?.
edit:
The problem is in Bass, I have to much bass. Does anyone know how to lower the bass?? I have looked everywhere but can't find anything.
edit:
The problem is in Bass, I have to much bass. Does anyone know how to lower the bass?? I have looked everywhere but can't find anything.
by Dante » Sun Dec 21, 2008 18:52
Garfield wrote:yeah and i did like ninja did, and its better but not the best like ninja says, my quality suck. How i can change my quality?.
edit:
The problem is in Bass, I have to much bass. Does anyone know how to lower the bass?? I have looked everywhere but can't find anything.
/Fixed
/Dante
by RapidHail » Sat Jan 17, 2009 21:43
I can add from Windows 7 beta :>
-=RapidHail=-: Do or do not... There is no try.
-|PS|- Server Monitor
eRepublik Citizen
Network Toolkit
-|PS|- Server Monitor
eRepublik Citizen
Network Toolkit
by -Drag- » Sat Jan 17, 2009 22:13
How to put Stereo Mix on Vista? I Know, And im gonna show it ( I needed this thing for my xfire videos so i could have sound with them )
So Open Control Panel
Click On Classic View
Then Open Sound
From There Recording
Now Right Click And Select Those Both ( Like in my image) Then Enable Stereo Mix and all done!
)
So Open Control Panel
Click On Classic View
Then Open Sound
From There Recording
Now Right Click And Select Those Both ( Like in my image) Then Enable Stereo Mix and all done!
13 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 17 guests